How to brew by Booze for Free’s Andy Hamilton

I’m convinced that human civilisation was founded on beer and started when we first learned how to brew a beer. A far-fetched claim, perhaps, but there’s evidence to back it up. Around 16,000 years ago, our ancestors first started to cultivate grain and is it too much of a leap to suggest we only did this in order to brew a beer?. As, at the same point in our history, the first beers were starting to appear, probably made from that very grain. These beers were developed by the Sumerians, who lived in what is now southern Iraq.

Spruce beer with little cones in front
Photograph Courtesy of Roy Hunt

Such beverages were crude compared to modern standards and, served in vast jugs, they were drunk through reed straws as the beer in the jug was still fermenting.By 10,000BC, the first written ‘words’ were appearing on clay tablets – among them a first recipe for a sort of bread that can also be made into a beer. Thus, one of the first recorded writings in human history was for homebrew.

Although the brewing process has become more sophisticated, the enjoyment derived from sharing a batch of homemade beer with friends remains reassuringly the same thousands of years later.

So why brew your own beer? For many homebrewers, it’s the cost. Back in January, the average cost of a pub pint rose above £3 for the first time. I can brew beer for 40p a pint.

Secondly, I’d say flavour. When I was younger I used to drink supermarket lager and I had long-assumed that lager tasted better than ale and it was (and is) incredibly cheap – you pay more for bottled water.

Now, of course, I cannot believe what I was missing. As soon as I was introduced to the world of beers, ales, porters, bitters, stouts, milds and even properly conditioned lagers, I realised that beer had a range of wonderful flavours and subtleties to rival wine. My quest to make the finest beer has become an obsession.

Thirdly, homebrew is almost certainly better for you and lower in calories than any mass-produced beer or lager on offer. It doesn’t contain any additives and you know exactly what’s gone into it. I find it odd that we British consumers have become so anxious about what we eat that we want to know what field our Sunday roast was born in and who its grandmother was, yet when it comes to beer we don’t have the same considerations.

Lastly, there is great satisfaction to be had from using home-grown or foraged ingredients. They are natural, local and sustainable. And from an environmental perspective, to reuse a barrel or bottle five or more times is far better for the planet than a new bottle for every beer, even if you only consider the carbon dioxide released through distribution. It’s joy all

Making a beer- How to brew


Hops Hops are the flowers of the hop vine; you can find them in the hedgerows from late August to early September. In the wild, the vine will climb trees, reaching 4m (13ft) or more. Commercially, hops are grown up long, sturdy poles and the whole vine is harvested. Hops add bitterness to the wort and aroma to the final beer, which would otherwise be too sweet-tasting. Using hops originally caught on because they inhibit the growth of bacteria.

Yeast Yeast is a micro-organism that is actually a fungus. It feeds on sugar, so when added to a sugar solution, as with making beer, it will multiply and do so until it has eaten all the available sugar, producing alcohol in the process. It will then die off, leaving a sediment.

Malt Malted grains are grains that have been allowed to germinate before the germination is halted with hot air. This turns the grain’s starches into the sugars needed for the fermentation process.

What you need to brew a beer

Getting your homebrew up and running is where most of the costs come in. But with a bit of foraging, it is possible to bring the cost down to practically nothing. The basic equipment you’ll need includes:

1. A plastic fermentation bucket that holds 40 pints (22l), plus a lid. You can buy these from homebrew outlets or health food shops. Or forage a food-grade bucket from a local restaurant – they are often thrown away. 2. A long-handled plastic spoon for stirring. 3. A 40-pint (22l) barrel or strong beer bottles (you’ll need 40 or so). The barrel can cost up to £25 but brown beer bottles can be foraged for free from recycling boxes – ask the owner first – or by asking your local pub for empties. 4. A 2-3m (6½-10ft) length of clear plastic tube is used to siphon the beer into barrel or bottles once it has fully fermented. 5.  A typical brew kit – this one requires you to add 1kg (2lb 2oz) of sugar. 6. Sterilising powder. You can also used crushed campden tablets. 7. Hydrometer – useful for measuring alcohol content but not essential. 8. Measuring cup. 9. Sachets of yeast – these are usually included with a beer kit, see 5. 10. Bottle capper and caps – a simple lever for crimping bottle tops on to your beer bottles. The bottle tops become airtight, meaning you can keep the beer fresh for months or even years. Beer in a barrel will go off within a couple of weeks after being broached.

Sterilise, sterilise, sterilise

Almost every homebrew disaster can be attributed to poor sterilisation. I scrub all my equipment with soap and a cloth, then sterilise it using a powdered bleach (available from homebrew shops). Put a few teaspoons of powder in the fermentation bin and top up with warm water. Leave for up to two hours and then throw in all the equipment you will be using to ensure it’s all sterilised. Rinse everything thoroughly before use.

3 levels of how to brew your own beer …

EASY – how to brew a beer from a kit

A standard kit includes a large tin of malt extract infused with hops and some yeast, and costs around £10. You will need to add your own sugar. Kits around £20 have slightly more malt extract. The difference between the two is seen in the body of the beer – the more refined sugar you add, the thinner the beer.

It is possible to substitute the sugar in the cheaper kit for dried malt extract, available from most homebrew shops. But this seems largely pointless since you would be paying the same as you would for a better kit. I always plump for the £20 kit, as it means you can often choose a beer you like and get brewing straight away. The most recent kit I bought was a St Peters Brewery India Pale Ale and I was extremely pleased with the results.
Method 1. Set 3.6l (6¼pts) of water to boil – always heat more than the recipe suggests, as the water will reduce as it comes to the boil.

2. Sterilise and rinse the fermentation bin and spoon. Stand the tins of malt extract in a washing-up bowl and top up with very hot water. Try to completely submerge the tins. This helps to loosen the malt extract and makes it easier to pour.

3. Pour the malt extract into the bottom of the fermentation bin. Pour over the boiling water and stir quickly yet methodically with a plastic spoon. You need to ensure that all of the malt extract dissolves. If you’re using a cheaper kit, at this stage you will stir in the sugar.

4. Top up with cold water to the desired amount. If you require a stronger beer, top up with less than recommended, or more for a weaker beer.

5. If your kit comes with powdered hops, add it along with yeast once the temperature is lukewarm. Move bin to a warm place for 4-7 days.

6. After this period, ensure that fermentation has ceased. A hydrometer is really useful (see below) but if you don’t have a hydrometer, check that your brew is no longer bubbling.

7. You now need to bottle your beer or put it in a barrel (see above).

MEDIUM – How to brew a Malt extract beer

The next step up from making beer from a kit is known as malt extract brewing. Extract brewing can work out much cheaper than making beer from a kit. It also gives you more freedom to experiment with different malts and hops, thereby giving you more options for the flavours of your brews. I’ve thrown beer-tasting parties with beer made this way and it has always gone down well. At its simplest, malt extract brewing can be just as easy as kit brewing, something I’m sure that kit manufacturers won’t thank me for saying. To make beer, all you need is sugar in the form of malt extract, a bittering agent such as hops, and some yeast. That really is it.

Ingredients 13l (23pt) of water 1kg (2lb 2oz) malt extract 55g (2oz) dried hops 750g (1lb 10lb) sugar or pale dried malt extract Ale yeast

Method 1. Bring half of the water to the boil and pour in the malt extract. Boil this mixture for 30 minutes. Then throw in the hops and boil for a further 30 minutes.

2. Strain the liquor into the fermentation bin and add the sugar or dried extract. Stir thoroughly to ensure that the sugar has fully dissolved.

3. Pour in the rest of the cold water and allow to cool. When the temperature is lukewarm (about 18°C), sprinkle on your yeast.

4. Seal the bin and leave it for a week or until it has fermented (when you have a consistent hydrometer reading over a few days).

5. Place half a teaspoon of sugar into each empty bottle and siphon the liquid into the bottles, ensuring that you don’t siphon in any of the sediment.

6. Leave the bottles for at least 10 days. Then they are ready to drink.

EXPERT – How to brew a beer the All-grain method

Don’t let the word ‘expert’ put you off – once I made beer a few times I started to wonder why I thought it was so hard. In some ways, all-grain brewing is like baking a cake or making a loaf of bread – make sure you get the stages correct and you will get good results. The term ‘all-grain’ basically means all of your sugars that will ferment into beer will come directly from the grain, without taking the short cut of using malt extract. To do so, you will need to undertake a process known as mashing; this means keeping the grains at a specific temperature for long enough for the starches to turn to sugars. You will need a very large boiling pan, however.

Ingredients 20l (35pt) of water (hard if possible) 65g (2oz) Goldings hops 2.25kg (5lb) pale malt 225g (½lb) crushed crystal malt Ale yeast

Method 1. Heat half the water to 75°C and pour into a sterilised picnic cool box. Place the grains into the cool box and put the lid on. Check the temperture, it needs to stay at 65°C, if it dips below then top up with boing water. Leave for an hour. You can use a muslin bag to contain the grains.

2. After an hour, strain the water (wort) into a large pan. Heat another 5l (8¾pt) of water to 75°C and pour this over the grains. Strain this into the boiler. Repeat with the final 5l (8¾pt) of water.

3. Place the hops into a square of muslin cloth and tie up the corners to save mess. Dangle this into the boiler and boil for one hour. Stir occasionally. After an hour, strain into a fermentation bin.

4. Cool as quickly as possible, ideally with a wort chiller (costs about £40-£50). Other cooling options include moving the fermentation bin outside, putting it in the coldest room of the house, or putting it in iced water. When the wort has reached around 21°C, add the yeast.

5. Fit the lid and leave to ferment for between four and 14 days, or until your hydrometer gives a stable reading over a few days.

6. Siphon into beer bottles with half a teaspoon of sugar in them or a beer barrel with four tablespoons of sugar. Leave to condition for at least a week before drinking, preferably 3 weeks.